Why Clear Covers Help On Farms

Tarpaulins are used to keep crops, equipment, feeds and other farm products dry, wind and dust free.  

They allow light to fall through, allowing natural light to reach covered spaces.  

Clear Tarpaulins are suitable for small greenhouses, plant shelters and covered storage.  

They provide an easy solution for farm protection without compromising the visual appeal.

Protecting Crops From Bad Weather

Weather on the farm can turn around quickly.  

The sun can shine for a long time in the morning, before it rains in the afternoon and young plants are affected by heavy rainfall and cold winds.  

Light can be filtered through a clear cover, which may protect the crops from these issues.  

However, provide adequate room for circulation of air around plants, particularly during warm days.

Creating Simple Plant Growing Areas

Growing healthy plants is not always a costly proposition for farmers, even with a greenhouse.  

Using a clear sheet may be used to create a simple tent for seedlings, pots, or garden beds.  

Allows sunlight to reach plants while repelling rain from leaves.  

And when the weather improves, farmers can roll up or remove the cover.

Giving Young Plants Better Shelter

Young plants need care.  

They may also be adversely affected by the bending of stems during strong winds, or by soil erosion from heavy rainfall.  

These risks can be minimized and the growing area kept clean with a properly installed clear cover.  

However, be mindful of the plants and monitor them regularly as the heat will build up and burn the leaves and make the soil dry.

Keeping Animal Feed Clean And Dry

Animals require dry and clean area for feed.  

Hay, straw, grain bags and other supplies can be ruined if water gets into them.  

These materials can be covered with tarpaulins to protect them when farmers use them to cover a stack or storage area.  

Clear sheets also allow it to be easier to see what is underneath without having to lift the entire cover.

Storing Hay And Grain Safely

Choose a dry spot.  

Keep hay or grain bags on pallets, not on the ground where wet soil can be a problem.  

After placing the cover on top put the edges in place so the wind does not raise the cover.  

Allow for ventilation and inspect for moisture regularly to prevent mould and waste.

Covering Farm Tools And Equipment

Farm tools are expensive and they are good to protect.  

When the rain and dirt accumulates on the surface of rakes, buckets, hoses and smaller machines they can be susceptible.  

A clear tarpaulin offers a temporary cover, and allows those working underneath to view the contents.  

This is useful when someone is looking for a tool on a busy workday.

Making Daily Farm Work Easier

Keep tools close.  

A covered storage corner will enable workers to locate what they need without having to paw through wet boxes or congested sheds.  

Cover with a suitable cover and secure to secure points around the edges.  

Avoid sharp metal corners which can tear the material.

Protecting Supplies During Farm Repairs

Materials are frequently exposed to the elements on farm repair sites for hours or days.  

If rain gets in contact with the wood, pipes, bags of cement, and spare parts can suffer.  

A clear sheet allows this material to be covered and yet the workers are able to observe what is underneath.  

This may come in handy in cases where a shed has to be fixed up or a new shelter is still being erected.

Keeping Building Materials Ready

Do not leave supplies on the ground.  

If timber is set on supports, place a cover over the timber and place small parts in boxes before placing a cover over the area.  

A clear sheet will not correct storage problems by itself.  

After storms, inspect covered materials to see if they have become damp, and take wet materials to a dry location.

Choosing The Right Sheet Size

The size of farm cover is important.  

The sheet may not extend quite far to the sides and expose supplies to the rain, or it may extend too much and flap in high winds.  

Take measurements of the length and width of the space, and add extra material for securing.  

Consider the job first – a plant shelter should have a different fit to a pile of tools.

Checking Strength And Useful Features

Think very carefully about the sheet.  

A cover with strong edges, good eyelets and appropriate thickness can provide longer service life for the cover in normal farming use.  

Certain clear sheets also provide protection from the sun, which could be beneficial if the cover is left outside for extended time periods.  

Before purchasing, read the product description, and select an appropriate type for the job and weather.

Securing Covers Against Strong Winds

Wind can pose problems.  

It can tear off a loose leaf, harm plants in the vicinity, or yank a cover over hard surfaces.  

Secure the sheet with appropriate ropes, strapping or fasteners.  

Inspect the fixing points periodically, particularly before or after storms and windy nights.

Leaving Enough Room For Airflow

Fresh air matters.  

A close-fitting cover will retain heat and moisture, possibly damaging plants or promoting mould around stored items.  

Allow for adequate ventilation and do not have water puddling in low areas of the sheet.  

Lift cover after wet weather and let wet areas dry.

Cleaning And Storing Clear Covers

With a little care, a clean sheet will last longer.  

It can accumulate dust, mud and plant material on its surface which may make it difficult to see through.  

Gently wash the sheet with water and a soft cloth, according to the instructions in the care label provided by the manufacturer.  

Do not use rough brushes or sharp tools which can scratch or puncture the material.

Getting More Use From Each Cover

Store correctly.  

Allow the sheet to dry before folding it up as it may cause mould or odours if stored soggy.  

Store it in a cool, dry area protected from sharp objects, fuels and other items that could harm it.  

Inspect for small holes prior to reuse and repair as material permits.